Type 2 ModelsType 2 ModelsType 2 ModelsForm# 45037-0120110606©2011 Hunter Fan Co.For Your Records andWarranty AssistanceFor reference, also attach you
1045037-01 • 06/06/11 • Hunter Fan CompanyAll wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are u
1145037-01 • 06/06/11 • Hunter Fan Company5-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket.5-2. Raise the can
1245037-01 • 06/06/11 • Hunter Fan Company6 • Assembling the BladesHunter fans use several styles of fan blade irons (brackets that hold the blade
1345037-01 • 06/06/11 • Hunter Fan Company7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch
1445037-01 • 06/06/11 • Hunter Fan Company7-5. To attach the lower switch housing, connect the upper plug connector from the motor to the lower p
1545037-01 • 06/06/11 • Hunter Fan Company8 • Operating and Cleaning Your Ceiling FanIn warm weather, use downward air ow patternIn cold weather,
1645037-01 • 06/06/11 • Hunter Fan CompanyProblem: Nothing happens; fan does not move1. Turn power on, replace fuse, or reset breaker.2. Loosen c
245037-01 • 06/06/11 • Hunter Fan CompanyTable Of Contents1 • Getting Ready...62 • Installing the Hanger Bracket ...73 • As
345037-01 • 06/06/11 • Hunter Fan CompanyPreparing the Fan Site7’ Minimum Blades to Floor8’ Minimum Ceiling Height30” From Wall or Nearest Obstruc
445037-01 • 06/06/11 • Hunter Fan CompanyPreparing the Fan Site (continued) CAUTION: All wiring must be in accordance with national and local elec
545037-01 • 06/06/11 • Hunter Fan CompanyInstaller’s Choice and Optional AccessoriesUnderstanding Mounting and Installer’s Choice®Hunter’s patente
645037-01 • 06/06/11 • Hunter Fan CompanyTo install a ceiling fan, be sure you can do the following:• Locate the ceiling joist or other suitable s
745037-01 • 06/06/11 • Hunter Fan Company2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box
845037-01 • 06/06/11 • Hunter Fan CompanyYou can assemble your fan for standard or angled mounting as shown in steps 3-1 – 3-3. For low profile mou
945037-01 • 06/06/11 • Hunter Fan Company3 • Assembling and Hanging the Fan (Low Profile Only)You can assemble your fan for standard or angled mou
Commentaires sur ces manuels