Hunter-fan SET & SAVE 44155C Manuel d'utilisateur télécharger pdf (Page 15)

4. Remove the wall plate and drill two 3/16”

holes where marked.

5. Tap the plastic anchors into the holes until

they are ush with the wall.

6. Reposition the wall plate on the wall, pulling

the wires through the opening. Insert the

mounting screws through the wall plate and

into the anchors. Verify that the wall plate

is visually level and securely tighten both

screws.

INSTALLING THE THERMOSTAT, CONT.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Pas de commentaire

Hunter-fan SET & SAVE 44155C Manuel d'utilisateur Page 15