Hunter-fan 41818-01 Manuel d'utilisateur télécharger pdf (Page 9)

41818-01 • 03/12/09 • Hunter Fan Company

Note: Be sure the arrows on the downrod and on the ceiling plate are

both pointing toward the tab hole on the canopy.

5-1. Hook the tab hole in the canopy over the tab on the ceiling plate.

5-2. Raise the canopy. Make sure the holes in the canopy and in the

ceiling plate are aligned.

5-3. Partially install the three canopy screws into the canopy one at a

time. Once all three screws are in, tighten them.

5-4. Using both hands, push the canopy trim ring up to the top of the

canopy. e canopy trim ring will snap and lock into place.

Should you need to remove the canopy

trim ring, follow these steps:

1. Locate the tab indicators, small

bumps on top of tabs.

2. Press rmly on opposite sides of the

ring toward the canopy. e tabs will

ex out releasing the trim ring from

the canopy.

Steps 5-2 – 5-3

Step 5-1

Step 5-4

Tab Hole

Tab

Canopy

Screw

Canopy

Trim Ring

5 • Installing the Canopy and Canopy Trim Ring

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Hunter-fan 41818-01 Manuel d'utilisateur Page 9