Hunter-fan 41818-01 Manuel d'utilisateur télécharger pdf (Page 11)

41818-01 • 03/12/09 • Hunter Fan Company

7 • Completing Your Installation With or Without a Light Fixture

Your Hunter fan comes with an integrated light xture assembly and an

optional switch housing cap and plug button. is feature gives you the

option of installing the fan with OR without the included light xture.

e steps below direct you whether or not you are installing a light

xture.

WARNING: Use only the light xture supplied with this fan model.

7-1. To attach the upper switch housing, partially install two housing

assembly screws into the switch housing mounting plate.

7-2. Feed the upper plug connector through the center opening of the

housing.

7-3. Align the keyhole slots in the housing with the housing assembly

screws.

7-4. Turn the housing counterclockwise until the housing assembly

screws are rmly situated in the narrow end of the keyhole slots.

Install the remaining screw into the housing. Tighten all three

screws rmly.

CAUTION: Make sure the upper switch housing is securely

attached to the switch housing mounting plate. Failure to properly

attach and tighten all three assembly screws could result in the

switch housing and light xture falling.

7-5. If you want to install the light xture, proceed with step 7-6

now.

If you do not want to install the light xture, proceed with step

7-10 now.

Steps 7-1 – 7-3

Housing

Assembly

Screw

Upper

Switch

Housing

Step 7-4

7 • Completing Your

Installation With or

Without a Light Fixture

(Continued)

1 2 ... 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Hunter-fan 41818-01 Manuel d'utilisateur Page 11